Silk

Silk

Interior/Exterior Oil Modified Water Base Urethane
Great for Log Homes and Many Other Wood Applications

S150 Crystal Clear Satin Finish
Rymar gives you "Future Products Today"
Non-Yellowing durable Advanced Wood Protection

RYMAR RAIN WET SILK leaves a crystal clear satin silk like finish that is formulated with an oil modified water base urethane. Silk is low odor and cleans up with warm soap and water and is non-yellowing. It is a two or three coat system for interior or exterior use and will last up to 20 years. The latest technology with advanced Nano Particle protection gives unsurpassed performance against sun, water, dirt and abrasion. Silk gives unsurpassed protection on the interior of log homes, doors, window, trim, walls, floors, and many other wood applications.

NANO PARTICLE TECHNOLOGY We continue the revolution in wood sealers from Rymar with cutting-edge Nano Particle technology; an ultra-fine particle developed by scientist from around the world. The particles are so fine that approximately 3000 will fit ont he cross section of a hair. This super tight, layered shield gives unsurpassed protection against abrastion, UV light and moisture, which was not obtainable to this degree prior to Nano Particle technology. We have also incorporated anti-microbial nano particles to help fight bacteria. Colors will now remain more vibrant, longer than ever before.

SUNSEAL SUNSCREEN Once again we have incorporated Nanofine technology into our already advanced UV inhibitors creating what we believe to be the best possible protection against damaging UV light. Our super tight Nanofine Oxide shield virtually eleminates any UV light penetration through reflection and retraction.

CHEW STOP is a natural pepper, additive that discourages bothersome bees, bugs, spiders and flies from making your home their home.

NATURAL OILS are blended into a propietary urethane oil formula for hardness, durability, and flexibility, giving your project unparallelled protection.

DUPONT PTFE is used to both repel water and help protect against weather erosion.

WATER AND DIRT REPELLENT Other so called water repellent wood sealers can't match the water beading qualities of our sealer. With our proprietary Hydrosil additive you get unparalleled protection against both moisture and dirt, while allowing the wood to breathe. in order to help stabilize wood, you must keep out moisture. Along with the oils and PTFE you get superior protection which allows for easy cleaning of dirt buildup on wood.

ANTI-GRAFFITI additive helps protect wood from crayons, food, grease, dirt and many other stains, making cleaning and maintaining your woods natural beauty much easier.

PRODUCT SPECIFICATIONS

Restrictions: Apply when air and surface temperature are above 60 degrees and below 85 degrees.

Weight Per Gallon: 8.56 pounds

Solids by Weight: 29.63

VOC: In Can .93, Applied 2.49

Paintable: No

Flashpoint: N/A

Type: Clear

Vihicle: Water

Finish: Satin

Containers: 1 Gallon, 5 Gallon

Coverage: Approximately 400-450 square feet per gallon, depending on porosity of wood.

Dry Time: Approximately 1/2 hour to touch, 24 hours to use, 30 days to full cure. All times are temperature and moisture dependent.

Clean-Up: Warm soap and water

Application: Nylon brush, foam pad applicator, sprayer

Reduction: None

Cure: Air Dry

Substrate: Wood

CLEAR WILL NOT STOP GRAYING AS LONG AS THE PIGMENTED COLORS