Home >
  
Water Base Sealer Ordering Page
While supplies last 30% Discount



Water Base


 

RYMAR PENETRATING WATER BASE SEALER is a high-solids penetrating sealer with Nanofine technology that comes in a variety of natural colors.  With one application, wet on wet, and soap and water clean up it is easier than ever to add lasting beauty to your outdoor wood project.

NANOFINE PARTICLE  We continue the revolution in exterior wood sealers from Rymar with cutting edge Nanofine Particle technology.  An ultra-fine particle developed by scientists from around the world.  The particles are so fine that approximately 3000 will fit on the cross section of a hair.  This super tight-layered shield gives unsurpassed protection against abrasion, UV light and moisture, which were not obtainable to this degre prior to Nanofine technology.  colors will now remain vibrant longer than ever before.

SUNSEAL SUNSCREEN  Once again we have incorporated Nanofine technology into our already advanced UV inhibitors creating what we believe to be the best possible protection against damaging UV light.  Our super tight Nanofine shield virtually eliminates any UV light penetration through reflection and refraction.

NATURAL AND SYNTHETIC OILS  A blend of Supreme linseed oil and synthetic oils allows for good penetration of the wood and still gives a surface build for greater protection of the substrate.

CITRONELLA OIL  Citronella oil is a naturally occurring organic substance obtained from leaves of Asiatic lemon oil grass.  commonly used as a natural mosquito repellent, Rymar Wood Sealer with citronella oil may help keep those pesky insects away when properly applied to your project.

DUPONT PTFE  is used to both repel water and help protect against weather erosion.

WATER REPELLENT  Other so-called water repellent wood sealers can't match the water beading qualities of our sealer.  With Nanofine technology you get superior water protection.  While most others last for a very short time, ours beads like nothing you've seen before.  In order to help stabilize wood, you must keep out moisture.

APPLICATION TEPS FOR WATER BASE SEALER

  • Do Not Apply Rymar Water Base Sealer over any other product.
  • Rymar Water Base Sealer can be applied over Rymar Oil Base Sealer as a second coat.  Wait at least 6 months before you apply Rymar Water Base over one coat of Rymar Oil Base Sealer.
  • Do Not Apply Rymar Water base if there is a build up of Rymar Oil base Sealer on your project, i.e. 2 or 3 coats.
  • Chew Stop can be added to the Water Base.
  • This is a wet on wet system, however, when applying in higher temperatures and the first coat dries before you can apply the second coat, do not attempt to reapply.  The second coat can be applied whenever you feel it is necessary.
  • When applying on railing do not allow sealer to drip on the deck, if it does, wipe it up to prevent dark spots.
  • Be sure and brush out any sagging on railings and siding.

CLEAR WILL NOT STOP GRAYING AS LONG AS THE PIGMENTED COLORS



ShopFactory (TM). Click Here.