RAIN WET SHEEN

RYMAR RAIN WET SHEEN is an oil modified water base urethane that cleans up easily with soap and water.  It is a one, two or three coat system, depending on desired sheen and color intensity, that will last up to five years or longer.  With our cutting-edge technology, you get deep, rich, lasting protection from sun, water, dirt and abrasion.

NANO PARTICLE TECHNOLOGY  We continue the revolution in exterior wood sealers from Rymar with cutting-edge Nano Particle technology; an ultra-fine particle developed by scientists from around the world.  The particles are so fine that approximately 3000 will fit on the cross section of a hair.  This super tight, layered shield gives unsurpassed protection against abrasion, UV light and moisture, which was not obtainable to this degree prior to Nano Particle technology.  We have also incorporated anti-microbial nano particles to help fight bacteria. Colors will also remain more vibrant, longer than ever before.

SUNSEAL SUNSCREEN  Once again we have incorporated Nanofine technology into our already advanced UV inhibitors creating what we believe to be the best possible protection against damaging UV light.  Our super tight Nanofine Oxide shield virtually eliminates any UV light penetration through reflection and retraction.

CHEW STOP  is a natural peper, additive that helps prevent animals from chewing on wood.  discourages bothersome bees, bugs, spiders and birds which might otherwise cause damage to your wood.

NATURAL OILS  are blended into a proprietary urethane oil formula for hardness, durability, and flexibility, giving your project unparallelled protection.

DUPONT PTFE  is used to both repel water and help protect against weather erosion.

WATER AND DIRT REPELLENT  Other so called water repellent wood sealers can't match the water beading qualities of our sealer.  With our proprietary Hydrosil additive you get unparalleled protection against both moisture and dirt, while allowing the wood to breathe.  In order to help stabilize wood, you must keep out moisture.  Along with the oils and PTFE you get superior protection which allows for easy cleaning of dirt buildup on wood. 

COMPARE THE FACTS

• 5 Year Warranty
• 1/2 hour dry time
• Less Maintenance
• Less coats, less cost
• Soap and water clean-up
• Nano Sunscreen Technology
• Versatile exterior and interior system
• Shorter reapplication time between coats
• Preparatory Hydrosil dirt and water repellant
• Available in eight sheen colors including clear  (#3135 Smoky Mountain Mist - New 2008)
• Chew Stop, a natural bug and animal deterrent
• Tough, flexible, breathable oil modified urethane

PRODUCT SPECIFICATIONS

Restrictions:  Apply when air and surface temperature are above 60 degrees.

Weight Per Gallon:  8.48 pounds

Soilds by Weight:  27.30

VOC:  In Can .84, Applied 2.35

Paintable:  No

Flashpoint:  N/A

Type:  Clear, Semi-transparent

Vehicle:  Water

Finish:  Gloss

Colors:  8

Containers:  1 Gallon, 5 Gallon

Coverage:  Approximately 300-400 square feet per gallon

Dry Time:  Approximately 1/2 hour to touch, 24 hours to use, 30 days to full cure.  All times are temperature and moisture dependent.

Clean-Up:  Warm soap and water

Application:  Nylon brush, foam pad applicator, sprayer

Reduction:  None

Cure:  Air dry

Substrate:  Wood

New Color for 2008 - #3135 Smoky Mountain Mist

CLEAR WILL NOT STOP GRAYING AS LONG AS THE PIGMENTED COLORS